Usb Port Wiring - Patlite PHC-D08 User Manual

2.4. USB Port Wiring

This product can be controlled via USB transmission by connecting a USB (Type B) cable from the main unit to the USB
port of a PC. Since this product can operate on USB Bus Power, it can be used without an AC Adaptor. However, this
product requires installation of a specialized driver for the PC before being connected to a PC via the USB. Go to our
PATLITE homepage (http://www.patlite.com) to download the installer.
2
Caution
MEMO
12
*The USB cable is not included. Please purchase it separately.
• Use a straight USB cable when connecting to the connection device's port (PC).
This product may malfunction and cause failure to the Main Unit and other connected
devices if they are used together with other devices.
• Do not bundle the USB cable with power supply cords when being used. Failure to comply
may result in malfunction from induced noise.
• Do not connect the USB and RS-232C cables simultaneously. Failure to comply may
result in malfunction.
• Do not insert or pull out the USB cable while the power supply is turned on.
• Depending on the feeding power capability of the Main Unit or the USB port of the personal
computer, operation may become unstable. Use an AC Adaptor if this condition occurs.
• Use this product by connecting the USB cable directly, without the use of a USB hub.
Failure to comply may cause unstable operation.
• It is recommended to use a USB cable with the length of 2m or less. Cables longer than 2m
may cause unstable operation due to induced noise from the surrounding environment.
• When installing exclusive drivers for compatible Operating Systems, etc., refer to the
instructions attached to the drivers.