Table of Contents
Advertisement
Final Set-up Diagram
The following diagram and photo illustrates all of the components connected.
Additional Information
Communication will take place between the INOmax DS
INOmeter after the boot up phase of the INOmax DS
Note: Cylinder icons are not visible and the dose control button
will remain inactive until the INOmax DS
INOMAX cylinder.
Note: When using the Transport
Regulator/Cap Assembly
only one cylinder will be
displayed (see Figure 9).
Proceed with the
INOmax DS
IR
Checkout
(see page 6)
Pre-Use
Transport Regulator/
IR
recognizes an
IR
Figure 9
13
Cap Assembly
and the
IR
is complete.
Part No. 20751 Rev-01
2014-08
Advertisement
Table of Contents
