Table of Contents
Advertisement
Logging in
In the Settings area you can choose to control
the system via RS232 or using IP. The
maximum Log size can also be set.
Default TCP/IP setting:
IP address : 192.168.0.10
Port
: 10001
Please make sure to turn-off wireless signal,
otherwise the system may get log-in failure.
Both of these settings can be edited whilst
logged in by using the General menu.
The View Log button displays the
Communications Log which shows all of the
actions being carried out by the system.
You can also Save Log to a text file if you wish to
keep a copy of the log.
The default Login details for your system is:
Username: admin
Password: adminpw
Change IP Address:
In order to change IP address for ET-MWP100G,
need to connect via serial cable.
After log-in via serial cable, you can change IP
address in "Settings" >"Ethernet" after click "Take"
button.
9
Advertisement
Table of Contents
