Table of Contents
Advertisement
Saving Data
1) Save to ET-MWP100G
To save all system settings including presets, input and output layout, please go to "Settings"
>"General" and select "Save All Settings" in Setting tab. And then, you can save whole data in non
volatile memory of ET-MWP100G.
To resume data, please select "Use unit data" when you log in the system.
2) Save to Local folder in connected PC
To save all system settings including presets, input and output layout, please select "Log out",
and you can name whole setting data and save in local folder in PC.
To resume data, please select "Use local data" when you log in the system.
3) Save to SD Card for backup [Service Purpose]
The other function is Backup to SD Card. An SD card is mounted on the CPU Module.
If firmware update is needed, you can backup current setting into SD Card.
After firmware has been updated, you can resume whole backup data from SD Card by typing
control command. For the command, please check command list.
11
Advertisement
Table of Contents
