Table of Contents
Advertisement
Setting Up Layouts
The Layouts menu is used to create physical screen layouts which can consist of a number of
physical displays. Displays can be identical or of different sizes and resolutions. By default the display
will be zoomed in to around 30% which is suitable for normal type layout setups. To see the
complete layout area, use the Zoom control to zoom out to around 4%.
In this set up two Layouts have been created
already of which one has been renamed and
the other left with its default name.
If we look at the layout area the "Two
Projector Blend" layout – you can see ghosting
on the image which shows the sources which
are laid over the Layout.
If we select one of the empty Layouts a list of
available output displays is shown.
16
Advertisement
Table of Contents
