Table of Contents
Advertisement
Outputs
The Outputs menu is used to set up the various displays that are connected to the ET-MWP100G.
Although your Outputs will be shown as Slot
and Input (eg Slot9.Out2) by default it is
possible to enter a user definable name which
must contain no spaces or hyphens using
underscores where spaces are required.
The output resolutions must be changed to
suitable resolution since defualt resolution
is settled as 1280x720p60.
The output Colour Scale is normally set to
Auto but can also be used to manually select
the colour space to be used:-
Black – Gives a monochrome output
YUV - Used for standard component sources
RGB – For standard computer sources eg DVI-I or
VGA
RGB_601/RGB_709 – a variation of the RGB colour
space
YUV_601/YUV_709 – a variation of the YUV colour
space
Genlock is used to lock the CORIOmaster to a
selected output
The Display Type can be selected from
Monitor, Projector and None. If Projector is
selected, additional projector blending
options will be made available in the Layouts
menu.
The output colour space has to be set
manually from the following options:-
RGBHV – VGA
RGBS – mixed syncs
RGsB – sync on green
YUV – DVI/HDMI
If the outputs display a padlock symbol it
14
indicates that HDCP is present.
Advertisement
Table of Contents
