Panasonic ET-MD77NT Specifications

S P E C F I L E
Network Board for DLP™ Projector
This board is designed for use with the DLP™ projectors. It enables remote control of the projector and
transmission of still images to the projector from a PC on a LAN via a Web browser.
Specifications
Power supply:
Power consumption:
Terminals: LAN:
Dimensions (W x H x D):
Weight:
Operating temperature:
Operating humidity:
Dimensions
unit: mm
(Dimensions given in inches are approximate.)
As of December 2006
NOTE: Please use the module only on the specified Panasonic DLP™ projector.
Provided from the DLP™ projector
Projector power consumption increases approximately 5 W
RJ-45 x 1, 10Base-T/100Base-TX for network connection
204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)
280 g (10.2 lbs.)
0°C – 40°C
10% – 80% (no condensation)
204
(8-1/32˝)
ET-MD77NT
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
DLP and DLP logo are trademarks of Texas Instruments.
Note: This illustration is not drawn to scale.
1