Table of Contents
Advertisement
Configuring Inputs and Outputs
Before you can start to create Canvases and Layouts you must first set up your Inputs and
Outputs using the Settings Menu.
Please configure how many displays planning to use for the system since the system requires
reboot to change window configuration.
Window Configuration
EHQ(Extra High Quality) is used for full screen which requires detail data, letters and drawing on
large format displays and HQ is normally selected for video contents.
All use Panasonic's high quality interpolation and resizing algorithms so it is not possible to compare
directly but the sizes of the Windows are based on following configuration:
Window Configuration
-EHQ
Extra High Quality
- HQ
High Quality
- PW
Preview
There are correlation between EHQ and HQ; 1 EHQ =2HQ.
There is system limitation for max. number of windows. Besides system limitation, there is window
limitation for one canvas too.
In the Settings menu you can access General system
data, set up Ethernet network connections and we set
up the Inputs and Outputs.
scaled resolution
- up to 1920 x 1200
Suitable for detail data, letters and
- up to 1024 x 1200
Video contents, Presentation
- up to 224 x 128
Preview Monitor, signal check
10
preferable source
ie) use 8EHQ and 8HQ in 8 EHQ mode
A)If using just one canvas
Max. windows are 8EHQ, 0HQ.
B)If using several canvases
You can use more windows
in the system
Canvas#1 8EHQ
Canvas#2 0EHQ, 8HQ
Advertisement
Table of Contents
