Table of Contents
Advertisement
User Interface
ET-MWP100G uses a common PC interface for control which features a number of menu
areas together with asset lists and controls.
The high level menus – Settings, Layouts, Canvases, Live and Comm Data – are used to configure
and use the system:-
General
Settings
Ethernet
Inputs
Outputs
Save
Layouts
Layouts
Outputs
Canvases
Canvases
Layouts
Inputs
Presets
Live
Comm Data
Log Out
This menu shows the software level and the number of inputs/outputs.
Used to configure the system for IP control of a ET-MWP100G.
Physical inputs into the mainframe. Most cards have two inputs per card except HD-SDI which has 4
inputs. This menu is used to configure and rename Inputs.
These are the physical outputs from the mainframe. All cards have two outputs per card. This menu
is used to configure and rename Inputs.
We can save all of the System settings. This is important once changes have been made to ensure
they are saved on the mainframe.
An arrangement of one or more output projectors or monitor screens that will have a Canvas
displayed on it.
Used to select the physical outputs to be included on Canvases. A physical output can only be used
on a single Canvas.
This menu is used to arrange a number of video windows applied to a Layout.
A canvas can be applied to one or more Layouts – this is where we select which Layouts are used.
The list of available system inputs is listed here. An input can be used multiple times.
Once we have set up a Canvas or a number of Canvases we can save them to Presets which can be
recalled in this menu or in the Live mode.
In the Live menu we can recall Presets and change the video inputs being displayed.
Comm data shows a dynamic text view of the system operations. Plus text commands can also be
entered.
As well as logging out of the software it is possible to save a copy of the system settings.
7
Advertisement
Table of Contents
