Comm Data
The Comm Data menu shows a rolling display of system activity. It also has the facility for entering
Control Commands. Some useful commands are:-
Command
1
System.backupToSDCard()
2
System.RestoreBackup()
System.SaveAllSettings()
3
System.ClearSavedSettings()
4
System.RestoreAll()
5
System.Reset()
6
Coriomax.Software_Update()
Action
Backup settings to SD card. This will do a complete back up of all settings
from the system flash memory onto the internally mounted Micro SD
card designed for user storage. This is used to back up the settings
where the system software needs to be reinstalled or updated.
Restore settings from SD card. This will write the settings saved to the
user storage onto the system flash memory. This is typically done after
reinstalling or upgrading the system hardware. It may not always be
possible to use the backup file if the versions do not match depending
on the software release.
This command saves the current system configuration as the power on
default.
Save all settings to restore the settings when you restart the system.
Restore all settings
Reset the system. The unit will come back up with the last saved
settings. You will be required to log back in to the system to gain
control.
Update the firmware
31