Table of Contents
Advertisement
Inputs
The Inputs menu is used to set up the various sources connected to ET-MWP100G.
Each source can have a Procamp applied to it to change Brightness and Contrast with a limited range.
Although your inputs will be shown as Slot and Input (eg Slot1.In1) by default
it is possible to enter a user definable name which must contain no spaces or
hyphens using underscores where spaces are required.
13
The card type and input status (OK, Missing) is
automatically detected.
However if it does not detect automatically,
please select "Input Type" is to select a source type
from the inputs supported by the type of connection.
For example, here a DVI-U connector could be used
to give us a variety of digital and analogue input
types.
The Colour Scale is normally set to Auto but can
also be used to manually select the colour space to
be used:-
Black – Gives a monochrome output
YUV - Used for standard component sources
RGB – For standard computer sources eg DVI-I or VGA
RGB_601/RGB_709 – a variation of the RGB colour space
YUV_601/YUV_709 – a variation of the YUV colour space
The Source Resolution and Selected Resolution are read
from the Input menu.
The Source Loss Colour means show the color image
if no source comes through each input.
Advertisement
Table of Contents
