Crestron DM-NVX-351 Product Manual page 42

If, for any reason, the factory default settings of a DM NVX device must be restored,
do one of the following:
On the Device page of the web interface, click the Restore button.
•
From the Tools menu in the Crestron Toolbox software, select Text Console and
•
issue the restore command.
Power cycle the device 10 times. After the tenth power cycle, wait until the device
•
boots and then press the SETUP button for 5 seconds.
38 • DM NVX 4K60 4:4:4 HDR Network AV Encoders/Decoders Product Manual – DOC. 7839G