Bypass Mode; N Ooutput Mode - AccuLine TNplus 1000m User Manual

set to enable , the bATT string and battery remaining time value (in
Min or Sec) will be displayed in turns, changing every 2 sec.
When the UPS is operating in battery mode, the buzzer beeps once
every 4 seconds. If the ON button on the front panel is pressed for
more than 1 second, the buzzer will stop beeping (silence mode).
Press the ON button once again for more than 1 second to reset the
alarm function.

6.3 Bypass mode

The LCD display in bypass mode is shown as figure 6.3. Information
about the mains power, the battery level, the UPS output and the load
level will be displayed. The UPS will beep once every 2 minutes in
bypass mode. The bYPA string indicates that the UPS is operating in
bypass mode.
6.4 No Output mode
The LCD display in No output mode is shown as figure 6.4. nformation
about the mains power, the battery level, the UPS output and the load
Figure 6.2 The Battery mode
Figure 6.3 The Bypass mode
-21-