Connection And Operation; Inspection; Connection - AccuLine TNplus 1000m User Manual

LCD idle function:
If the LCD background idle function is enabled, when the UPS is turned
off to standby mode, the LCD background light will be switched off
within 5 seconds. With any key pressed, the LCD background will be
lighted on.
When the UPS is operating in battery mode or bypass mode, the LCD
blue background will flash twice every second to remind you.

5. Connection and Operation

The system may be installed and wired only by qualified
electricians in accordance with applicable safety regulations!
When installing the electrical wiring, please note the nominal
amperage of your incoming feeder.

5.1 Inspection

Inspect the packaging carton and its contents for damage. Please
inform the transport agency immediately if you find signs of damage.
Please keep the packaging in a safe place for future use.
Note: To avoid any safety issue, please ensure that the incoming
feeder (mains) is isolated completely during the whole installing
process.

5.2 Connection

(1) UPS Input Connection
If the UPS is connected via the power cord, please use a proper
socket with protection against electric current, and pay attention to
the capacity of the socket. The UPS System has an input breaker on
the standard cabinet.
-12-