Audible Alarm Mute Function - AccuLine TNplus 1000m User Manual

5.7 Audible alarm mute function:

If the audio alarm during the battery mode is too annoying, it can be
muted by
The audio alarm will be activated again when the battery reaches low
status for reminding that the UPS output power will be soon cut off.
If the audio alarm during the bypass mode is too annoying, it can be
muted by pressing the OFF button continuously for more than 1 second.
This action doesn t affect the warning and fault alarms.
In any mode, if the warning or fault alarm is too annoying, you can mute
it by press
press
warning or fault alarm appears, the buzzer will beep again.
You may use the UPS in CVCF mode without the batteries connected. If
the open battery alarm is too annoying, you can mute it via the software.
NO.
1
2
3
4
5
6
7
ON
ON
ON
Alarm Table List
Status
Battery mode
Battery mode with
battery low
Bypass mode
Overload
Warning active
(see Warning & Fault
Code Table )
Fault active
Button function active
tton continuously for more than 1 second.
less than 0.5 second, and enable it by
less than 0.5 second again. If a new
Alarm
Beep once every 4 sec
Beep once every sec
Beep once every 2 min
Beep twice every sec
Beep once every sec
Beep continuously
Beep once
-18-