UPS will transfer to battery mode and the load will be supplied
continuously by the battery.
1) CVCF mode can be enabled via the LCD settings or the software
(Winpower, etc.).
2) The normal power rating will be derated to 60% in the converter
mode.
6.8 Abnormal mode
In abnormal mode such as Bus fault etc., the corresponding fault string
will be shown on the LCD display to indicate the status of the UPS and
the background light will become red color. For example,
will appear when there is a short
connected loads and the LCD display will be as in figure 6.5 which
follows:
circuit on the UPS output or the
Figure 6.5 The Fault mode
-23-
string