The console station(s) will restart after successfully receiving the
deployment information.
Terminal
Terminal provides a command line to execute options using a terminal
interface. Type a command in the window and hit [Enter] to execute it.
Click "Terminal" under "Maintenance" in the left-hand side menu to
bring out the terminal page.
Note: Expand the submenu by clicking the + symbol if "Terminal" is
not shown.
Available commands include:
GET => Gets current configuration.
HELP => Provides Help information for commands.
CLEAR => Clears the screen.
PING => Displays ping host information.
SETLDAPMEMBER => Sets new value for ldap member.
SETLDAPMEMBEROF => Sets new value for ldap memberof.
SETPROMPT => Sets prompt string.
TRACERT => Displays trace route information.
DEVICEHISTORY => Clear/Enable/Disable device list history
SELFDIAGNOSTIC => Self Diagnostic
Chapter 5. System Configuration
59