Geeetech A10M User Manual page 10

SHENZHEN GETECH TECHNOLOGY CO,.LTD
Main functions of Control menu:
1. Temperature: you can change the temperature of the hotbed and the extruder in real time in printing
process. Meanwhile you can set the temperature of Preheat PLA and Preheat ABS.
2. Motion: setting of the motion parameters in the firmware. You need choose "store settings" to save after
altering the setting.
3. Filament: switch on/off filament detector and set filament diameter.
4. Store settings: to save the altered parameters.
5. Load settings: to restore the original parameter settings.
6. Restore failsafe: restore factory settings.
7. Initialize EEPROM: initialize the printer settings after failing to read the relevant parameters.
7