Build Platform Leveling - Geeetech A10M User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
Note: A10M supports stand-alone printing via SD card. Just copy the g.code file into the SD card to start
your printing journey.

6. Build platform leveling

Before printing, it is necessary check whether the moving path of the extruder is parallel with the heatbed or
not, which is called leveling. We need make sure the distances from the nozzle of the extruder to the four
cornered of the heatbed are the same, and only in this way can we get good printing quality.
a. Home the printer.
24