Wps Setup (Wi-Fi Protected Setup) - Pioneer HTZ-BD52 Operating Instructions Manual

Note
available on an access point or wireless
router's setting. If your access point or wireless
code of the key "No.1" to connect on your home
network.
An Access Point is a device that allows you to
connect to your home network wirelessly.
[Scan] – The player scans the all available
access points or wireless routers within
range and display them as a list.
[Manual] – Your access point may not
be broadcasting its access point name
(SSID). Check your router settings through
your computer and either set your router
to broadcast SSID, or manually enter the
access point name (SSID) in [Manual].
[Auto] – If your access point or wireless
router that supports the Push Button
Configuration method, select this option
and press the Push Button on your access
point or wireless router within 120 counts.
You do not need to know the access point
name (SSID) and security code of your
access point or wireless router.
Note
If there is no DHCP server on the network and
you want to set the IP address manually, Please
refer to "Setting the IP address". (Page 80)
WPS setup
(Wi-Fi Protected Setup)
WPS connection setting
industry group for a function allowing settings
wireless LAN devices and encryption to be
made with simple operations.
This unit supports push-button configuration
and PIN code configuration.
PBC (Push Button Configuration)
Connection settings are made automatically
the simplest way of making the settings, and
PIN Input
Connection settings are made by inputting the
8-digit PIN code shown on the main display to
the access point to which you selected. Follow
the instructions shown in Connecting using
PIN code configuration on the right.
[Initial Setup] [Network]
[Wireless].
1. Press HOME MENU.
The HOME MENU screen is displayed.
2. Use cursor buttons to select [Initial
Setup] and press ENTER.
The Initial Setup screen is displayed.
3. Select [Initial Setup]
[Wireless Setting] [Next Screen] and
press ENTER.
A confirmation screen is displayed.
4. Use / to select Yes, then press
ENTER.
The Wireless Setting screen is displayed.
5. Use / to select Auto, then press
ENTER.
The WPS Setting screen is displayed.
6. Use / to switch between [ PBC] or
[ PIN] screens.
Connecting 49
En
2
[Interface] to
[Network]