Wps Setup (Wi-Fi Protected Setup); Wps Connection Setting - Pioneer BDP-160 Operating Instructions Manual

4 Finish entering the security code by selecting Enter
07
using /// and pressing ENTER.
Select Next using /// and press ENTER. If it
7
connects success, it will display connection success
and IP is obtained.
8 Pressing ENTER ends Wireless Setting.
Note
• WEP security mode generally have 4 keys available on
an access point or wireless routerís setting. If your
access point or wireless router use WEP security,
enter the security code of the key "No.1" to connect on
your home network.
• An Access Point is a device that allows you to connect
to your home network wirelessly.
Scan - The player scans the all available access points or
wireless routers within range and display them as a list.
Manual - Your access point may not be broadcasting its
access point name (SSID). Check your router settings
through your computer and either set your router to
broadcast SSID, or manually enter the access point name
(SSID) in [Manual].
Auto - If your access point or wireless router that
supports the Push Button Configuration method, select
this option and press the Push Button on your access
point or wireless router within 120 counts. You do not
need to know the access point name (SSID) and security
code of your access point or wireless router.
Note
• If there is no DHCP server on the network and you
want to set the IP address manually, Please refer to
Setting the IP address on page 38.
WPS setup (Wi-Fi
Protected Setup)

WPS connection setting

WPS is abbreviation of Wi-Fi Protected Setup. A standard
established by the Wi-Fi Alliance industry group for a
function allowing settings related to interconnection of
WPS compatible wireless LAN devices and encryption to
be made with simple operations.
This unit supports push-button configuration and PIN
code configuration.
PBC (Push Button Configuration)
Connection settings are made automatically simply by
pressing the WPS buttons on the WPS compatible
wireless LAN device. This is the simplest way of making
the settings, and is possible when the WPS compatible
wireless LAN device is equipped with WPS button.
PIN Input
42
En
Connection settings are made by inputting the 8-digit PIN
code shown on the main display to the access point to
which you selected. Follow the instructions shown in
Connecting using PIN code configuration on the right.
When performing wireless settings set Initial Setup 
Network  Interface to Wireless.
1 Press HOME MENU.
The HOME MENU screen is displayed.
2 Use cursor buttons to select Initial Setup and
press ENTER.
The Initial Setup screen is displayed.
Select Initial Setup  Network  Wireless
3
Setting  Next Screen and press ENTER.
A confirmation screen is displayed.
4 Use / to select Yes, then press ENTER.
The Wireless Setting screen is displayed.
Use / to select Auto, then press ENTER.
5
The WPS (Wi-Fi Protected Setup) screen is displayed.
Use / to switch between [PBC] or [PIN]
6
screens.
When connecting using PBC go to step 7.
When connecting using PIN go to step 8.
7 When connecting using PBC (Push Button), on the
[PBC] screen use / to select Next, then press
ENTER.
Then press the WPS button on the access point within
120 seconds.
8 When connecting using PIN confirm the PIN Code
on the [PIN] screen. Use cursor / to select Next,
then press ENTER.
9 Enter into the access point the PIN Code that you
confirmed in step 8 above.
The PIN Code input method differs depending on the LAN
device used. For details, consult the operating
instructions accompanying your LAN device.