Other Operating; Recording Audio Cd To A Usb Device - Pioneer HTZ-BD52 Operating Instructions Manual

Chapter 7

Other Operating

Recording Audio CD to a
USB device
You can record audio CD to a USB device using
this player.
1. Insert an USB device into the USB port
on the front panel.
Note
Please connect only one USB device.
2. Open the disc tray and place an Audio
CD on the tray.
OPEN/CLOSE.
Press
3. Close disc tray.
OPEN/CLOSE is pressed, playback
will start automatically.
If playback does not start automatically,
press the PLAY on the remote or
(PLAY/PAUSE) on the device to start
playback.
4. Press USB REC during CD playback.
[CD RIP] will be displayed.
5. Select the song or the Track No. you
want to record.
If you are recording all the songs on the CD
use / / / to select [Select all] and press
ENTER.
If you are selecting a Track to record use
/ / / to select the Track No. and press
ENTER.
If there are more than one Track you want
to record, repeat the step for 5.
If you want to delete a selected Track use
/ / / to select [Select None] and
press ENTER.
6. Set the recording speed
Use / / / to select [Speed] and press
ENTER.
The recording speed will change each
time ENTER is pressed. The recording
speed will change as shown below.
Normal: when recording while listening
to the music.
Fast: will record at approx 4x speed. You
cannot listen to the music.
7. Start recording.
Use / / / to select [Start] and press
ENTER to start recording.
8. Exit CD recording display.
Use / / / to select [Cancel] then press
ENTER after recording has finished.
Note
Use cursor / / / to select [Bitrate] then press
ENTER to change the Bitrate setting.
The set speed will change each time [Bitrate] is
pressed. The set value can be selected from those
shown below.
[64kps] [96kbps]
[256kps] [320kps]
/
Other Operating 69
En
[128kps] [192kps]
7