Communication Setup - Pioneer BDP-120 Operating Instructions Manual

SETTINGS

Communication Setup

This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions that connect to the internet.
NOTE
• Make sure that the LAN cable is connected to this Player.
(See page 18.)
• For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
− IP address, netmask, gateway, DNS IP address
• Besides, if specifying a proxy server, the following
information specified from your internet service provider is
also required. Confirm the information prior to the setting.
− IP address and port number of the proxy server
1
Press HOME MENU to display the Home Menu
screen.
Press  to select "Settings", then
2
press ENTER.
Press  to select "Communication Setup",
3
then press ENTER.
Press  to select "Change", then press
4
ENTER.
Setting the info. of the Ethernet
[Current Setup]
IP Address : Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Proxy : Not Use
Change
• For initializing the current setting, select "Initialize",
then press ENTER.
40
5
6
7
8
9
Initialize
For setting the IP address, press  to select
"Yes" or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes
IP Address
Netmask
Gateway
Next
• If selecting "Yes": The IP address is automatically
obtained.
• If selecting "No": The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 42.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
Select "Next", then press ENTER.
For setting the DNS IP address, press  to
select "Yes" or "No", then press ENTER.
Do you obtain the DNS IP address
automatically?
Yes
Primary
Secondary
Next
• If selecting "Yes": The DNS IP address is automatically
obtained. (The DHCP server function of the router or
modem is used for the automatic acquisition.)
• If selecting "No": The primary and secondary IP
addresses are entered using the screen for inputting
characters. (See page 42.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
Select "Next", then press ENTER.
For setting the proxy server, press  to
select "Yes" or "No", then press ENTER.
Do you use the proxy server?
Yes
Address
Port
Next
• If selecting "Yes": The IP address or proxy server
name and port number for the proxy server specified
from your internet service provider are entered using
the screen for inputting characters. (See page 42.)
• If selecting "No": Go to the next step.
No
No
No