Ipod/Iphone Playback; Connecting Your Tv - Pioneer HTZ-BD52 Operating Instructions Manual

70 Other Operating
En

iPod/iPhone playback

Merely by connecting your iPod/iPhone to
this unit, you can enjoy high-quality sound
from your iPod/iPhone. This unit can also be
connected to a television set, letting you view
images from your iPod/iPhone.
Playback and volume level setting for iPod/
iPhone music and images can be performed
from this unit or the iPod/iPhone itself.
The iPod nano 6G cannot play back video,
but can play slide shows only.
This system has been developed and tested
for the software version of iPod/iPhone
indicated on the website of Pioneer (http://
pioneer.jp/homeav/support/ios/eu/).
Installing software versions other than
indicated on the website of Pioneer to your
iPod/iPhone may result in incompatibility
with this system.
by this unit, use a commercially available
cable to connect the iPod/iPhone to the
PORTABLE IN connector of this unit.
Before connecting the iPod, turn this unit
off and reduce the volume of this unit to its
minimum.
1. Connect the cradle so that the mark
downwards. Put your iPod/iPhone on it.
Connect the iPod/iPhone firmly.
If you turn this unit on, your iPod/iPhone
is automatically turned on and recharging
7
starts.
Note
Pioneer does not guarantee that this unit plays
iPod/iPhone models other than the ones specified.
Some functions may be restricted depending on
the model or software version.
iPod/iPhone is licensed for reproduction of non-
copyrighted materials or materials the user is
legally permitted to reproduce.
Features such as the equalizer cannot be controlled
using this system, and we recommend switching
the equalizer off before connecting.
Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising
from any inconvenience or loss of recorded
material resulting from iPod/iPhone failure.
For detailed instructions on using the iPod/iPhone,
please refer to the manual supplied with the iPod/
iPhone.

Connecting your TV

To watch iPod/iPhone images on a television,
connect it using a composite video cable.
the TV output setting of the iPod/iPhone is
automatically set to 'ON'.
Note
Some iPod allow the TV output setting to be
changed while connected.
is
unit, the iPod/iPhone's TV output setting returns to
its original state.