Wall Mounting The Speakers For Bcs-Hf828 - Pioneer HTZ-BD52 Operating Instructions Manual

32 Connecting
En
Wall mounting the speakers
for BCS-HF828
Before mounting
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
2
Make sure that the wall you intend to mount
the speakers on is strong enough to support
them. Do not mount on plywood or soft
surface walls.
Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
Caution
If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
Pioneer is not responsible for any accidents or
damage that result from improper installation.
1. Use the vertical mounting screw to fasten
the wall mounting fixture to the speaker
system.
2. Attach to wall.
screws
(available
commercially)*
6 mm to 8 mm
Purchase appropriate screws taking into
consideration the type of wall and the
weight of the speaker system.
Open two holes in the wall 95 mm apart.
When mounting the unit on speaker stand
Use the accessory bracket when mounting the
unit on any speaker stand or base other than
those provided.
Use M5 screws for installation. Mounting
screws are not provided.
Follow the instructions accompanying your
selected speaker stand or base.