Download  Print this page

Instruction Codes - Mitsubishi Electric FR-A7NC Instruction Manual

Plug-in option, cc-link communication function.
Hide thumbs

Advertisement

7.2.3

Instruction codes

(1) Instruction code definition
Set the instruction code using a remote resister (RWw) (Refer to page 49.)
The definition read by the instruction code is stored in the remote resister (RWr). (Refer to page 52.)
Item
Operation mode read
Operation mode write
Output frequency
*1, *2
Output current
Output voltage
Monitor
Special monitor
Special monitor
selection No. (read)
Special monitor
selection No. (write)
*1
When "100" is set in Pr. 52 DU/PU main display data selection, frequency setting is monitored during a stop and
output frequency is monitored during running.
*2
When speed display is set using Pr. 37 and Pr. 144, the monitor is 1r/min increments.
Code
Number
H0000: Network operation
H007B
H0001: External operation
H0002: PU operation
H0000: Network operation
H00FB
H0001: External operation
H0002: PU operation (Pr. 79 = "6")
H006F
H0000 to HFFFF: Running frequency (hexadecimal) Increments 0.01Hz
H0000 to HFFFF: Output current (hexadecimal)
H0070
Increments 0.01A(55K(01160-EC, 55K-CH) or less)/0.1A(75K(01800-EC,
S75K-CH) or more)
H0071
H0000 to HFFFF: Output voltage (hexadecimal) Increments 0.1V
H0000 to HFFFF: Check the data of the monitor selected by the
H0072
instruction code H00F3.
Check the monitor code set in the
H0073
special monitor.
Check the monitor code to be set in
H00F3
the special monitor.
DETAILS OF INPUT AND
OUTPUT SIGNALS
Description
Monitor code
(Refer to page 59.)
7
55

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-A7NC

Comments to this Manuals

Symbols: 0
Latest comments: