Settings Menu Navigation; Navigation To Settings Menu; System; Preferences - Mercury VesselView 7 Manual

Section 4 - Setup and Calibrations

Settings Menu Navigation

Navigation to Settings Menu

1. Press the pages button while the SmartCraft screen is visible.
a
g
2. Turn the rotary knob so that the last icon is highlighted. The last icon is the Settings menu.
3. Press the rotary knob.

System

The System menu allows you to format the time and date, turn buzzers and horns off or on, change various lighting
parameters, import a graphic for a customized splash screen, turn the simulation program on (this is generally used at the
dealership level), and identifies the software version.
The greater‑than sign ( > ) indicates additional menu choices.
Language Select the desired language
Change time and date format
Time >
Automatic time update is only available if a GPS is connected.
Key Beeps >
Buzzer >
Alarm Beeps
Level >
Night Mode
Backlight >
Network Update
Local Gain >
Image Viewer > SD Card Selection
Simulate On (checkmark), Off (no checkmark)
Restore Defaults All Settings, Engine Limits, Alarm History
About Display Software Version

Preferences

The Preferences menu allows you to:
1. Select which engines are to be displayed, the helm number, and device number
2. Select if the display is visible at the helm
3. Enable an ambient temperature sensor readout
4. Set the auto‑cycle interval
5. Turn off or on autopilot or skyhook popup screens
6. Turn data boxes on or off
7. Turn popup warnings on or off
Page 28
b
a - Standby–Auto button
b - Exit button
c - Rotary knob (press for enter function)
c
d - Goto–Pages button
e - In/Out Zoom, man overboard (MOB)
f - Power–Brightens
d
g - Mark–Menu button
e
f
52837
Systems
—
—
Off, Quiet, Normal, Loud
On (checkmark), off (no checkmark)
0–100%
On (checkmark), off (no checkmark)
On (checkmark), off (no checkmark)
0–100%
—
—
—
—
90-8M0074777
eng
MAY 2013