Tenda W15E User Manual page 26

Parameter description
Parameter
WAN Ports
Connection Type
PPPoE Username
and PPPoE Password
IP Address, Subnet
Mask, Gateway,
Description
It is used to configure the number of WAN ports, and view the status of RJ45 ports
(connection status and types of the ports).One WAN port is enabled by default.
If you modify the number of WAN ports, the status of RJ45 ports changes as well. See
the following figure.
The ports connect properly.

No devices connect to the port, or connection is faulty.

The router provides three connection types:
PPPoE: The ISP, such as China Telecom and China Unicom, provides the username

and password. To access the internet, you have to enter the PPPoE username and
password if your computer is connected to the ISP without a router.
Dynamic IP: The ISP, such as China Telecom and China Unicom, does not provide the

username or password. To access the internet, you just need to connect the
Ethernet cable to your computer if your computer is connected to the ISP without a
router.
Static IP: The ISP, such as China Telecom and Unicom, provides a fixed IP address. To

access the internet, you have to configure the static IP address on your computer if
your computer is connected to the ISP without a router.
They are available when the connection type of PPPoE is enabled. To obtain the
information, ask your ISP.
They are available when the connection type of Static IP is enabled. To obtain the
15