Table of Contents
Advertisement
5.3.3
Configuring the DHCP Server Parameters
Step 1
To access the DHCP Server module, choose Network > LAN Settings.
Step 2
DHCP Server: Click Enable.
Step 3
Start/End IP: Set the start IP and end IP of the IP address pool that the DHCP server can automatically
assign to the clients.
Step 4
Click OK.
---End
By default, the DHCP server of the router is enabled. If disabled, you need to manually configure the IP address of
every client connected to the router.
It is recommended that you retain the default DHCP server settings to ensure internet connectivity.
5.3.4
DHCP Reservation
Step 1
Choose Network > LAN Settings.
Step 2
Bind the IP address with the MAC address of the client.
If the client has connected to the router and obtained an IP address assigned by the router, perform the
following steps:
1.
Access the DHCP Reservation module.
2.
Locate the client that you want to create the IP/MAC bind, and click Bind.
If the client does not obtain an IP address assigned by the router, see the following steps:
1.
Access the Manual DHCP Reservation module.
2.
Click +Add.
24
Advertisement
Table of Contents
