Modifying The Lan Ip - Tenda W15E User Manual

Parameter description
Parameter Description
This button enables you to manually bind a static IP address for the client. To bind, you need
to know the MAC address of the client.
It is used to delete the selected bind rule of the IP address and MAC address.
IP Address It specifies the IP address corresponding to the MAC address of the client which it assigned to.
MAC Address It specifies the MAC address of a client.
Remark It describes the remark information (if any) of an IP/MAC bind rule.
Status It specifies whether to enable the IP/MAC bind rule.
It enables you to do the following actions:


Action

enable/disable the rule.

obtain other IP address from the DHCP server.
5.3.2

Modifying the LAN IP

Step 1 To access this module, choose Network > LAN Settings.
Step 2 LAN IP: Modify the IP address, which is 192.168.10.1 in this example.
Step 3 Click OK.
---End
Wait until the progress bar completes. If you cannot log in to the web UI of the router, make sure that the IP
address of your computer is set to Obtain an IP address automatically.
: It is used to disable the rule.
: It is used to enable the rule.
: It is used to edit the rule, including the MAC address, IP address, Remark, and
: It is used to delete the IP/MAC bind. The client corresponding to the MAC address can
23