Receiver Output Level - Shure ULXD Quick Start Instructions

ULXD ULX-D Digital Wireless Microphone System
Working Range
100 m (330 ft)
0
RF Tuning Step Size
25 kHz, varies by region
Image Rejection
>70 dB, typical
RF Sensitivity
-98 dBm at 10-5 BER
Latency
<2.9 ms
Audio Frequency Response
Audio Dynamic Range
System Gain @ +10
>120 dB, A-weighted, typical
Total Harmonic Distortion
−12 dBFS input, System Gain @ +10
<0.1%
System Audio Polarity
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
Operating Temperature Range
-18°C (0°F) to 50°C (122°F)
1
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
2

Receiver Output Level

The following table describes the typical total system gain from the audio input to the receiver outputs:
Output Jack
1/4" TRS
XLR (line setting)
XLR (mic setting)
*This setting matches a typical wired SM58 audio signal level.
0 Note: Actual range depends on RF signal absorption, reflection and interference.
1 Note: Battery characteristics may limit this range.
2
Note: Battery characteristics may limit this range.
22/29
ULXD1
ULXD2
20 – 20 kHz (±1 dB)
Note: Dependent on microphone type
System Gain (gain control = 0dB)
+18 dB
+24 dB
-6 dB*
Shure Incorporated
2017/10/04