Battery Runtime Charts - Shure ULXD Quick Start Instructions

ULXD ULX-D Digital Wireless Microphone System Shure Incorporated
Use the LOCK feature to prevent accidental or unauthorized changes to the hardware. Attempting to access a locked feature will display the following message:
Receiver
Menu path: UTILITIES>LOCK
MENU: All menu paths are inaccessible. To unlock, press the EXIT button, turn the control wheel to select UNLOCKED and press ENTER to save.
GAIN: Gain adjustment is locked
POWER: Power switch is disabled
SCN/SYC: Cannot perform a Scan and Sync
Transmitter
Menu path: UTILITY>LOCK
MENU: All menu paths are inaccessible. To unlock, press the ENTER button four (4) times to pass through the following screens: UTILITY>LOCK>MENU UNLOCK
POWER: Power switch is disabled
Quick-Lock Option: To turn on the transmitter with its power and menu navigation buttons locked, press and hold the ▲ button during power-on until the locked
message is displayed.
To unlock, turn the power switch to the off position, then press and hold the ▲ button while turning the power switch to the on position.
Batteries
The transmitter runs on two AA batteries or the Shure SB900 rechargeable battery. Use the included AA battery adapter when using batteries other than the
Shure SB900.
Bodypack: Remove the adapter when using the Shure SB900
Handheld: Rotate and store the adapter in battery door when using Shure SB900

Battery Runtime Charts

A 5-segment icon on the receiver and transmitter menu screens indicates battery charge.
For accurate battery runtime monitoring, set the transmitter to the appropriate battery type: UTILITY>BATTERY>SET.AA.TYPE.
The tables display the approximate hours and minutes remaining (h:mm).
2017/10/04 13/29