Table of Contents
Advertisement
ULXD
ULX-D Digital Wireless Microphone System
LED
Red (6)
Yellow (5)
Yellow (4)
Green (3)
Green (2)
Green (1)
⑫ Gain Buttons
Adjust channel gain
⑬ Power Switch
Powers the unit on or off
Back Panel
① RF Antenna Diversity Input Jack (2)
For antenna A and antenna B.
② Power Supply Jack
Connect the supplied 15 V DC external power supply
③ Network Speed LED (Amber)
•
Off = 10 Mbps
•
On = 100 Mbps
④ Ethernet Port
Connect to an Ethernet network to enable remote control and monitoring
Note: Use shielded Cat5e or better Ethernet cables for VHF (V50 and V51) to ensure reliable network performance.
⑤ Network Status LED (Green)
•
Off = no network link
•
On = network link active
•
Flashing = network link active, flash rate corresponds to traffic volume
⑥ Mic/Line Switch
Applies a 30 dB pad in mic position (XLR output only)
⑦ Balanced XLR Audio Output
Connect to a mic or line level input
⑧ Balanced 1/4" (6.35 mm) TRS Audio Output
Connect to a mic or line level input
6/29
Audio Signal Level
-0.1 dBFS
-6 dBFS
-12 dBFS
-20 dBFS
-30 dBFS
-40 dBFS
Shure Incorporated
Description
Overload/ limiter
Normal peaks
Signal Present
2017/10/04
Advertisement
Table of Contents
