Receiver Output Level - Shure ULXD4E K51 User Manual

Note: Actual range depends on RF signal absorption, reflection and interference.Note: Actual range depends on RF signal ab­
sorption, reflection and interference.
RF Tuning Step Size
25 kHz, varies by region
Image Rejection
>70 dB, typical
RF Sensitivity
−98 dBm
-5
at 10 BER
Latency
<2.9 ms
Audio Dynamic Range
A-weighted, typical, System Gain @ +10
XLR Analog Output
Dante Digital Output
Total Harmonic Distortion
−12 dBFS input, System Gain @ +10
<0.1%
System Audio Polarity
Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of
XLR output) and the tip of the 6.35 mm (1/4-inch) output.
Operating Temperature Range
-18°C (0°F) to 50°C (122°F)
Note: Battery characteristics may limit this range.
Storage Temperature Range
-29°C (-20°F) to 74°C (165°F)
Note: Battery characteristics may limit this range.

Receiver Output Level

The following table describes the typical total system gain from the audio input to the receiver outputs:
Receiver Output Gain
Output Jack
1/4" TRS
>120 dB
130 dB
System Gain (gain control = 0dB)
+18 dB
Shure Incorporated
34/50