ULXD
ULX-D Digital Wireless Microphone System
Transmitters
① Power LED
•
Green = unit is powered on
•
Red = low battery or battery error (see Troubleshooting)
•
Amber = power switch is disabled
② On/Off Switch
Powers the unit on or off.
③ SMA Connector
Connection point for RF antenna.
④ LCD Display:
View menu screens and settings. Press any control button to activate the backlight.
⑤ Infrared (IR) Port
Align with the receiver IR port during an IR Sync for automated transmitter programming.
⑥ Menu Navigation Buttons
Use to navigate through parameter menus and change values.
exit
enter
▼▲
⑦ Battery Compartment
Requires Shure SB900A rechargeable battery or 2 AA batteries.
⑧ AA Battery Adapter
•
Handheld: rotate and store in the battery compartment to use a Shure SB900A battery
•
Bodypack: remove to accommodate a Shure SB900A battery
⑨ Bodypack Antenna
For RF signal transmission.
⑩ Integrated Antenna
For RF signal transmission.
⑪ Microphone Cartridge
See Optional Accessories for a list of compatible cartridges.
⑫ TA4M / LEMO Input Jack
Connects to a microphone or instrument cable.
2017/10/04
Acts as a 'back' button to return to previous menus or parameters without confirming a value change
Enters menu screens and confirms parameter changes
Use to scroll through menu screens and to change parameter values
Shure Incorporated
7/29