575mm x 575mm x 55mm Indicator Dimensions 285mm x 110mm x 55mm Please note: Marsden’s policy is one of continuous development and therefore we reserve the right to change product specification without notice. Indicator images in this manual are for illustration purposes only.
Marsden/the manufacturer shall not be liable for damages arising from failure to heed the following instructions: • When using electrical components under increased safety requirements, always comply with appropriate regulations.
Display Symbols ➔ Scale in auto zero range (indication = accurate zero) Confirms that weight resuklt is stable Scale in weighing mode; denotes units of reading kg , lb or oz Battery is low; approximately five minutes of operation remaining before the scale will power down The Net Weight is being display (NW) or the Gross Weight is displayed (GW)
Operation: Basic Functions Press ON/ZERO/OFF to power-on the Switching the Scale on scale. When the display shows zero it is ready for weighing. Switching the Scale off To switch the scale off, press and hold ON/ZERO/OFF. The scale will now power down.
8) Display shows span count. 9) Press TARE, display shows “CAL”, and then shows calibration weight in normal mode. 10) Remove the weight; calibration is now finished. For further help with the functions of this scale, please contact Marsden or your dealer. Page 8...