Thank you for choosing our product. All features of this product use state of the art design technology and are optimized for simple and straightforward use. If you have any queries or experience any problems not addressed in the operating instructions, please contact your MARSDEN service department or visit us at Sales@marsdengroup.co.uk...
Information). The device meets the requirements for electromagnetic compatibility. Do not exceed the maximum values specified in the applicable standards. If you have any problem, contact your local MARSDEN service department. ENVIRONMENTAL The optimum operating temperature for the scale is 5 C to 35 C.
MARSDEN’s scope of responsibility, MARSDEN shall have the right to either repair the fault or supply a replacement unit. Replaced parts shall be the property of MARSDEN. Should the repair or replacement scale not be satisfactory, the statutory provisions shall be valid. The period of warranty shall be one year, beginning on the date of purchase.
This product should not to be treated as regular household waste, but should be handed in to an electrical/electronic equipment recycling centre. You can obtain further details from your local council, your municipal waste disposal company or the firm from which you purchased the product. CAUTION ...
SPECIFICATION Capacity 10kg Division Operating Temperature 5℃ - 35℃ Unit Dimensions (including handles) 79 x 105 x 193(H) mm Keys ON/OFF/ZERO ; HOLD ; TARE Battery AAA batteries * 6 Accessories Scale * 1 / Sling * 1 / S Hook * 1 / User Manual * 1 * All are Class III approved weighing devices LCD DISPLAY...
KEY FUNCTIONS MS-4400 KEY DESCRIPTIONS ON/OFF/ZERO 1. Press to turn the scale on. 2. Press this key and hold for 3 seconds to turn the scale off. 3. Press this key with the scale on, to zero the scale. HOLD 1.
MARSDEN service department. 3. Zero counting value low Internal zero counting value is too low for operation. Please contact your local MARSDEN service department. 4. Zero counting value error This warning shows that the device has detected the zero counting value has exceed ±10% as default setting. If this...
Page 20
Marsden Weighing Machine Group Ltd Anvil House Tuns Lane Henley On Thames RG9 1SA Tel 0845 130 7330 Fax 0845 130 7440 Sales@marsdengroup.co.uk http://www.marsden-weighing.co.uk...
Need help?
Do you have a question about the MS-4400 and is the answer not in the manual?
Questions and answers