Related Manuals for marsden M-550
Summary of Contents for marsden M-550
- Page 1 Marsden M-550 User Manual Please take time to read these instructions before starting to use the scale.
-
Page 2: Table Of Contents
Introduction Thank you for purchasing a Marsden professional medical scale. This is a precision Class III weighing instrument and considerate use will result in many years of accurate weighing. The scale has a maximum load capacity of 160kg which must not be exceeded. -
Page 3: Safety Instructions
If any inaccuracies occur, please contact your local dealer or service partner. • If you are in the UK, service contracts are available from Marsden to keep your scale accurate and reliable for longer. Call 01709 364296 for more information. -
Page 4: Explanation Of Graphic Symbols
Explanation of Graphic Symbols Separate collection for Caution, consult waste of electrical and accompanying electronic equipment, documents before use in accordance with Directive 2002/96/EC Manufacturer of medical Manufacturing year of device medical device Carefully read user manual before Medical electrical installation and usage, equipment with Type B and follow instructions... -
Page 5: Power Supply & Low Battery
Power Supply & Low Battery The M-550 runs on four ‘AA’ alkaline batteries. When is shown on the scale’s LCD display, battery power is not sufficient enough for the scale to be used and the batteries should be replaced. The four ‘AA’ size alkaline batteries are contained in a compartment inside the scale. Access is via a removable cover on the underside of the scale, as shown below: Installing The Battery &... -
Page 6: Function Keys: Tare
Press ON/OFF to disable the BMI function. Setting the Bluetooth Function Please note: Marsden does not supply software for receiving data from the scale. These instructions should be followed when you are connecting to a system or device configured to work with Marsden Bluetooth scales. -
Page 7: Emc Guidance And Manufacturer's Declaration
Guidance and manufacturer’s declaration-electromagnetic emissions The MS6110 (M-550) is intended for use in the electromagnetic environment specified below. The customer or the user of the MS6110 (M-550) should assure that it is used in such an environment. Emission test Compliance... - Page 8 RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the MS6110 (M-550) is used exceeds the applicable RF compliance level above, the MS6110 (M-550) should be observed to verify normal operation. If abnormal performance is observed, additional measures my be necessary, such as re-orienting or relocating the MS6110 (M-550).
-
Page 9: Error Messages
Error Messages Low Battery The scale’s alkaline AA type batteries are flat; please replace the batteries. Overload This indicates that the scale’s load sensor(s) have been overloaded. Reduce the loading and retry. Counting Error The signal from the load cells is too high. Please remove any weight from the scale and try to power on again. -
Page 10: Troubleshooting
If the scale fault is due to mechanical or electronic defect then the scale will be repaired or replaced under warranty. The purchaser will need to return the scale to the original place of purchase (Marsden/your Authorised Dealer). Before you contact your Authorised Dealer, please read through the following section carefully. - Page 11 Page 11 of 12...
- Page 12 MARSDEN Unit 1, Genesis Business Park, Sheffield Road, Rotherham, S60 1DX Telephone: + 44 (0) 1709 364296 Version 1.1 Page 12 of 12...
Need help?
Do you have a question about the M-550 and is the answer not in the manual?
Questions and answers