Removing A Blade Server Cover - Cisco UCS B200 M4 Installation And Service Note

Servicing a Blade Server
Step 2 Gently slide the hard drive into the opening in the blade server until it seats into place.
Step 3
Push the hard drive lever into the closed position.
You can use Cisco UCS Manager to format and configure RAID services. For details, see the Configuration
Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at
the following URL:
guides_list.html
If you need to move a RAID cluster, see the

Removing a Blade Server Cover

Procedure
Step 1
Press and hold the button down as shown in the figure below.
Step 2 While holding the back end of the cover, pull the cover back and then up.
Figure 6: Opening a Cisco UCS B200 M4 Blade Server
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_
Cisco UCS Manager B-Series Troubleshooting
Cisco UCS B200 M4 Blade Server Installation and Service Note

Removing a Blade Server Cover

Guide.
13