Internal Components - Cisco UCS B200 M4 Installation And Service Note

Servicing a Blade Server

Internal Components

Figure 8: Inside View of the UCS B200 M4 Blade Server
1
3
5
7
9
11
When the storage module is installed, the USB connector is underneath it. Use the small cutout opening
Note
in the storage module to visually determine the location of the USB connector when you need to insert it.
SD card slots
USB connector
An internal USB 2.0 port is supported.
A 16 GB USB drive
(UCS-USBFLSHB-16GB) is available
from Cisco. A clearance of 0.950
inches (24.1 mm) is required for the
USB device to be inserted and
removed.
Front heat sink and CPU 1
Rear heat sink and CPU 2
Trusted Platform Module (TPM)
Adapter slot 1
Cisco UCS B200 M4 Blade Server Installation and Service Note
2 Modular storage subsystem connector
DIMM slots
4
6 CPU heat sink install guide pins
8 CMOS battery
DIMM diagnostic LED button
10
12 Adapter slot 2

Internal Components

15