Secure Digital Cards; Storage Module - Cisco UCS B200 M4 Installation And Service Note

Overview
1
2

Secure Digital Cards

Secure Digital (SD) card slots are provided and one or two SD cards can be populated. If two SD cards are
populated, they can be used in a mirrored mode.
Do not mix different capacity cards in the same server.
Note
The SD cards can be used to store operating system boot images or other information. Once the server has
been removed from the chassis, you can access the SD card slots by rotating the latch up so that it does not
cover the slots. Remove or insert the SD cards as needed. Either or both slots may be used. Rotate the latch
down to cover the slots before installing the server in the chassis.
Figure 3: SD Card Slot Locations

Storage Module

The Cisco UCS B200 M4 blade server has an optional storage module that can be configured with SAS or
SATA hard drives or solid state disks (SSDs). Because the UCS B200 M4 can be used without disk drives,
Connector to blade server local console
connector
DB9 serial connector
3 VGA connection for a monitor
4 2-port USB connector for a mouse and keyboard
Cisco UCS B200 M4 Blade Server Installation and Service Note
Secure Digital Cards
5