Storage Module; Removing A Blade Server Cover - Cisco UCS B200 M4 Installation And Service Note

slots. Remove or insert the SD cards as needed. Either or both slots may be used. Rotate the latch down to cover the slots before
installing the server in the chassis.
Figure 3: SD Card Slot Locations

Storage Module

The Cisco UCS B200 M4 blade server has an optional storage module that can be configured with SAS or SATA hard drives or solid
state disks (SSDs). Because the UCS B200 M4 can be used without disk drives, it does not necessarily come with the storage module
installed. A pair of blanking panels (two with this product ID: UCSB-LSTOR-BK) may be in place on a new UCS B200 M4 blade
server.
For information on installing the storage module, see Installing the Storage Module, on page 7.

Removing a Blade Server Cover

Replacing the cover is the reverse of removing the cover.
5