How To Wire; Part Names And Functions - Kenwood DRV-830 Instruction Manual

How to Wire

Connecting the cigarette lighter plug cord (accessory)
Connect the dashboard camera and power cord of the cigarette lighter plug cord.
When disconnecting the power cord, disconnect it while pressing the hook of the connector.
Open the power cord connector terminal's cover and connect the power cord.
After connecting the power cord, close the cover.
Dashboard Camera
Connect the cigarette lighter plug to the cigarette lighter socket.
Use the Power Cable for Dashcam; CA-DR100 (optional accessory)
CAUTION
Before performing the connection work, first check that the engine key is removed
and then be sure to disconnect the negative terminal of the battery to prevent a
short-circuit accident.
Connect the Dashboard Camera and power cord.
Open the power cord connector terminal's cover and connect the power cord.
After connecting the power cord, close the cover.
Dashboard Camera
Engine key switch
Accessory power supply
Fuse
ACC
BATT
Battery cord (Yellow)
Main fuse
Connect to a power supply with a voltage that is always applied regardless
of whether or not the engine key is on or off at a point after the power has
passed through the main fuse.
Ground cord (Black)
Connect to a metal part of the vehicle (part of the chassis with an electrical
Battery
connection to the negative side of the power supply).
GND
14
Cord length
(4 m)
Fuse
(2 A)
Cord length (3.5 m)
Accessory cord (Red)
Connect to a power supply that can be turned
on and off with the switch.
Fuse (2 A)

Part Names and Functions

4 3 2 1
5
6
7
8
9 0
Power cord connector terminal
1
Connect the included cigarette lighter plug
cord or the CA-DR100 power cable for Dashcam
(optional accessory).
Bracket attachment part
2
Mount the included mount bracket.
Camera lens
3
Speaker
4
Outputs audio guidance, warning sounds and
the audio when files are played.
% $
! @
#
/SHORTCUT button
5
When pressed while the menu is displayed,
z
moves to the previous item.
When pressed while recording, displays the
z
shortcut menu.
When pressed and held while recording,
z
switches the recording mode (normal/low
frame rate). ➜ P. 33)
When pressed during playback, plays the
z
previous file.
Fast-reverses when pressed and held during
z
playback, slow-reverses when pressed and held
while paused. Switches to playback when the
button is released while fast-reversing, to pause
when released during slow-reverse playback.
15