Kenwood DRV-830 Instruction Manual page 17

Configuring the Settings
MENU
Playback
Continuous REC (Slot 1) Select the folder and play the desired file.
It is also possible to protect or delete the file during file playback.
Continuous REC (Slot 2)
Manual REC
Event REC
Parking REC
Still images
Parking recording settings
To use the parking recording function, the power must be connected with the CA-DR100 (optional
accessory). (➜ P. 14)
Recording time OFF (parking recording not performed)/10 sec*/20 sec /30 sec
Set the time for recording after an impact is detected.
Overwrite ON*/OFF
Set whether or not to overwrite old files after the maximum number of recording
files has been reached.
Detecting sensitivity 1 (Low Sensitivity)/2/3*/4/5 (High Sensitivity)
Set the sensitivity for detection of impacts to the parked vehicle.
Exit time after ACC OFF OFF*/30 sec/1 min/3 min
Set the time for which parking recording will be disabled after the engine key
is turned off.
Entry time before ACC ON OFF*/30 sec/1 min/3 min
Set the time for which parking recording will be disabled before the engine key
is turned on.
32
* Factory default settings
(➜ P. 26)
(➜ P. 28)
Recording settings
Audio recording ON*/OFF
Set whether or not to record the sound from the microphone when recording.
Continuous recording file 1 min*/3 min/5 min
length Set the recording time for continuous recording. The recordings are split according
to the recording time set here.
For low frame rate recordings, the file length is 10 minutes, regardless of the
value set here.
Manual recording time 15 sec*/30 sec/1 min
Set the time for recording after manual recording is started. The recording time
before the [REC] button is set is fixed to 10 seconds.
Event recording time 15 sec.*/30 sec./1 min.
Set the time for recording after an impact is detected. The recording time before
an impact to the vehicle is detected is fixed to 10 seconds.
Overwrite (manual) ON/OFF*
Set whether or not to overwrite old files after the maximum number of recording
files has been reached.
Overwrite (event) ON/OFF*
Set whether or not to overwrite old files after the maximum number of recording
files has been reached.
Resolution 2560×1440 (HDR)/2304×1296 (HDR)
/1920×1080 (HDR)*/1280×720 (HDR)
Sets the resolution for recording.
Recording mode Normal*/Low frame rate
Select a recording mode. Selecting low frame rate recording increases the recording
time to more than usual.
Low frame rate 9 fps*/3 fps
Set the image update frequency during low frame rate recording. The smaller the
value, the longer the recording time.
Detecting sensitivity (event) 1 (Low Sensitivity) /2/3*/4/5 (High Sensitivity)
Set the sensitivity for detecting impacts to the vehicle.
Automatic still image capture Capture interval
1 min./5 min.*/15 min./30 min.
Set the interval for capturing images with the automatic still image capture function.
Number of captured images
10/30*/50
Set the number of images to be captured with the automatic still image capture
function.
Information stamps ON*/OFF
Set whether or not to record subtitles (date and time, position information, etc.).
* Factory default settings
33