How To Wire - Kenwood DRV-430 Instruction Manual

How to Wire

Connecting the cigarette lighter plug cord (accessory)
Connect the dashboard camera and power cord of the cigarette lighter plug cord.
When disconnecting the power cord, disconnect it
while pressing the hook of the connector.
Dashboard Camera
Use the power cable for Dashboard Camera; CA-DR100(optional accessory)
CAUTION
Before performing the connection work, first check that the engine key is removed
and then be sure to disconnect the negative terminal of the battery to prevent a
short accident.
Engine key switch
Main fuse
Battery
10
Connect the cigarette lighter plug to the cigarette lighter socket.
Connect the Dashboard Camera and power cord.
Dashboard Camera
Accessory power supply
Fuse
ACC
BATT
Ground cord (Black)
Connect to a metal part of the vehicle (part of the chassis with an electrical
connection to the negative side of the power supply).
GND
Accessory cord (Red)
Connect to a power supply that can
be turned on and off with the switch.
Battery cord (Yellow)
Connect to a power supply with a voltage always applied
regardless of whether or not the engine key is on or off at
a point after the power has passed through the main fuse.
Cord length (4 m)
Fuse (2 A)
Cord length (3.5 m)
Fuse (2 A)