PoE Mode of IPOE-171 series:
PoE Mode
Standard
The standard mode is chosen to provide power to the PD
(Default)
devices that follow the IEEE 802.3af/at/bt standard.
The legacy mode is chosen to provide power to the PD
Legacy
devices that do not fully follow the IEEE 802.3af/at/bt
standard.
After changing the PoE mode, please power off and then
on the PoE injector to make the change effective.
Note
4.3 Industrial PoE+ Injector Upper Panel
The upper panel of the IPOE-171 series has one terminal block
connector where there are two DC power inputs.
14
Description
1 2 3 4 5 6
V1+ V1-
V2+ V2-
PWR1
Fault
PWR2
Figure 4: IPOE-171-60W upper panel.
1 2 3 4 5 6
V1+ V1-
V2+ V2-
PWR1
Fault
PWR2
Figure 5: IPOE-171-95W upper panel.
Input
DC 48~56V
Input
DC 24~48V