Step 2: Slightly push the unit down and lightly pull its bottom out to
completely remove it from the track.
5.3 Wall-mount Plate Mounting
To install the industrial device on the wall, please follow the instructions
described below.
Step 1: Unscrew the DIN-rail bracket to be removed from the
industrial device.
Step 2: Place the wall-mount plate on the rear panel of the industrial
device.
Figure 13: Attach brackets to the industrial device.
Step 3: Screw the wall-mount plate on the industrial device.
Step 4: Use the hook holes at the corners of the wall-mount plate to
hang the industrial device on the wall.
Step 5: To remove the wall-mount plate, reverse the above steps.
19