Model 1234 Sampling Sensor Specifications; Probe Ordering Information - Novatech 1732 Technical Manual

3.1.3 Model 1234 Sampling Sensor Specifications

Application
Range of Measurement
Accuracy
Process Connection
Electrical Connection
Cable
Heater
Sample Flow Rate
Differential Pressure
Thermocouple
Response Time
Reference Gas
Dimensions
Weight

3.1.4 Probe Ordering Information

When ordering an oxygen probe please specify the following required options:
1. Probe to be heated or unheated
2. Probe insertion length (from process end of mounting thread to probe sensing tip)
3. Mounting thread for the process connection, BSP or NPT (for size of thread refer to specifications).
4. Lagging extension length, if required.
5. Electrical Connection Type.
6. Outer Sheath Material, if not specified will assume 316 stainless steel
7. For model 1231 heated probe state filter type if required. If not specified will assume no filters
8. For model 1232 unheated probe, state thermocouple type. If not specified will assume R-type.
For a list of options for the above requirements refer to the appropriate probe specification tables in the
previous section.
August 2018
1732 Oxygen Transmitter
Sampling Sensor
Used in RGS-17 Reference Gas Sensor
<1ppm to 100% Oxygen
±1%
¼" NPT female, inlet and outlet
Weatherproof plug-in connector or optional screw terminals.
The plug connector can be supplied with the cable.
Order a specific length with the transmitter
Yes
1 to 5 litres per minute (2 to 10scfh)
80 to 800 mmWG (3 to 30inWG)
K, integral
Typically <1 second
n/a
300 x 125 x 85 mm (11.81" x 4.92" x 3.46") HxWxD
2.2 kg (4.8 lb)
Technical Manual
13