Table of Contents
Advertisement
5.1 Calibration
The probe adapter modules carry the calibration data for the instrument. If the unit is shipped with a
probe, the module is calibrated at the factory prior to shipment; otherwise, the module is shipped
uncalibrated. The instrument itself does not require calibration.
If required, calibration data stored in the probe adapter may be changed using the optional
Communicator, P/N 190-1A. Refer to the instruction manual supplied with the Communicator for further
instructions and specific procedures for entering calibration data.
Avoid indiscriminately mating probes with an
adapter
module;
otherwise
instrument or probe or loss of stored calibration
factors,
parameters,
information
may
recommends the use of heat shrink tubing to
permanently connect the probe and adapter.
CAUTION
damage
and
other
operational
occur.
Fluke
Biomedical
Calibration
Calibration
Section 5
Calibration
to
the
5
5-1
Hide quick links:
Advertisement
Table of Contents
