Fluke Victoreen 190 Operator's Manual page 34

Victoreen 190
Operators Manual
Part 14-434 (Europe)
Input 230 VAC, 50 Hz, 84 mA, 18.6 VA
Output 9 VDC, 780 mA, 7.02 VA, Regulated
Part 14-435 (United Kingdom)
•
Input 230 VAC, 50 Hz, 19.1 VA
•
Output 9 VDC, 780 mA, Regulated
Part 14-435, Part 14-416 (Australia)
Battery Lifetime
When powered from AC: Shelf life of the batteries
When powered from the batteries: minimum of 100 hours
Installation
Plug the 9-volt jack into the back of the Model 190AC and the AC to 9-volt DC adapter module into the AC
outlet. Turn on the Model 190AC. Doing this in any other order will not damage the Model 190AC or the
AC to DC converter module.
Removing the 9-volt DC power jack while the unit is on and powered from this source will not damage the
190AC or the adapter module.
The metal stand has holes in the base and back to permit permanent installation if desired.
Operational Procedure
The Model 190AC may be inserted or removed from the metal stand at any time.
There is no change in operational procedures from the Model 190. The Model 190AC will operate with
the AC to 9 VDC adapter module installed and no 9-volt batteries.
Applications
Possible applications for the 190F are:
Any environment where AC voltage is present and a survey meter is expected to be set up for active
operation and ease of viewing on a fairly continuous basis.
Frisker stations
Portable Portal Monitors
Troubleshooting
Refer to Section 4 - Maintenance for troubleshooting procedures.
Service Information
General
The 190F contains three functional elements:
Model 190AC Survey Meter
AC to 9-volt DC Adapter Module
Metal Stand
B-2